Knowing how to take out a nose stud with a flat back can be tricky. When you have your nose pierced, the piercing specialist will make sure that the area is clean and that there are no sharp edges left behind before putting in the stud. However, even specialist piercers can occasionally miss something and leave behind a piece of metal that’s not quite ready for prime time. If you have one of these piercing mishaps, this blog post will help you take out your nose stud with a flat back. It’s easy to get disheartened if you feel like it’s impossible to remove this type of piercing, but fear not! With some preparation and persistence, you can take out your nose stud with ease. Keep reading to learn more about how to take out a nose stud with a flat back!
How To Take Out A Nose Stud With A Flat Back?
Step 1: Find the Sharp Edge
The first step to taking out your nose stud with a flat back is to find the sharp edge. This can be tricky, as the sharp edge can be anywhere from the top edge where the stud meets the top of your nose, the middle of the stud, or the bottom edge where the stud meets the bottom of your nose. If you’re not sure where the sharp edge is, try using a pair of tweezers to gently pry up the stud. You may need to use a magnifying glass to get a good look at each part of the stud. If you’re not sure where the sharp edge is, you can look for signs like a dark discoloration where the metal has been rubbing against your skin or an open wound where the sharp edge has been cutting into your nose.
Step 2: Use A Piercing Saw On The Side With The Sharp Edge
Now that you’ve located the sharp edge, you’ll need to decide which side of the stud needs a piercing saw. If the sharp edge is on the bottom of the stud, use a piercing saw on the top side of the piercing. If the sharp edge is on the top of the stud, use a piercing saw on the bottom side of the piercing. While holding the stud steady with tweezers, gently saw through the stud on one side of the nose until you can pull the stud out the rest of the way on both sides. If the stud is particularly stubborn, you can try running a small amount of water on the side you’re sawing through.
Step 3: Use A Dremel With A Rotating Disc on The Other Side
If the stud has been giving you a hard time, you can use a rotary tool to snip through the rest of the stud. Be sure to use a rotary tool with a cutting disc on the side of the stud with no sharp edge. If the stud is on the top of your nose, you should use the bottom side of the stud. And vice versa if the stud is on the bottom of your nose. If the stud is on the top of your nose, use the top side of the stud to find the edge, and then use the bottom side of the stud to put the rotary disc on. Vice versa if the stud is on the bottom of your nose.
Step 4: Cut Through The Rest of the Stud With An End Cutting Knife
If the stud is particularly stubborn and the rotary tool doesn’t snip through in a single go, use an end cutting knife to chop through the stud one side at a time. Be sure to use the side of the stud with no sharp edge. If the stud is on the top of your nose, you should use the bottom side of the stud. And vice versa if the stud is on the bottom of your nose.
Why Is It So Hard To Take Out A Stud With A Flat Back?
- The main reason it’s so hard to take out a stud with a flat back is that the metal is relatively thick at both ends. This means you have to be very careful when using tools that are designed for thinner metal like a piercing saw or a rotary tool.
- Too much pressure and you risk bending the metal, which can make it harder to remove, and could even cause permanent damage to your nose!
- If you’ve been struggling with how to take out a nose stud with a flat back, these tips should help you get the job done.
- Once you’ve got the stud out, you can breathe a sigh of relief knowing that you won’t have to deal with that piercing again! You can also get a brand new piercing with a fresh, new stud!
Tips To Remove A Flat-Back Nose Stud
Hair Conditioner
One of the easiest and cheapest ways to remove a flat-back nose stud is with a hair conditioner. This is a great way to start removing your nose ring before you get in any pain. Simply apply a small amount of conditioner to the back of your nose ring, and then slide it out. It’s that easy! You can also use hair conditioner on your earrings if you want to easily remove them without any irritation on your ears. The hair conditioner works so effectively because it is a non-greasy lubricant. So, when you apply it to your nose ring, it allows the piercing to slide out a lot easier than if you had just tried to yank it out with a little bit of water. You can apply conditioner to the stud in your nose as many times as you need to, but you should remove the piercing at least once a week to keep the inside of your nose clean.
Hydrogen peroxide
If you’ve had your piercing for a while, it may have formed a little bit of a crust inside the piercing hole. This can be quite painful when you try to pull out the nose stud. The best way to avoid this is to make sure you clean your piercing with water every day. If you do this, though, at some point you may have to remove the crust to avoid pain. The best way to do this is with a bit of hydrogen peroxide. What you want to do is soak a cotton ball in the peroxide and then gently rub it over the inside of the piercing. You can also use a q-tip to do this. You can make it a bit more comfortable by adding a little bit of water to the hydrogen peroxide.
Scrape The Inside Of Your Nose Ring
If you’ve had your nose ring for a while, it has probably created a small bit of a crust inside the piercing hole. This can be quite painful when you try to pull out the nose stud. The best way to avoid this is to make sure you clean your piercing with water every day. If you do this, though, at some point you may have to remove the crust to avoid pain. The best way to do this is with a bit of water and a toothbrush. What you want to do is put a small amount of water on your toothbrush and then gently scrub the inside of the piercing. You can also use a q-tip to do this. You can make it a bit more comfortable by adding a little bit of water to the q-tip.
Boiling Water
If you’re really sick of your nose stud, you can remove it really quickly using boiling water. You might want to leave the piercing in for longer if you want it to heal faster, but if you just want to get rid of it, boil some water and then carefully pour it over the piercing. It will be very painful and will probably leave a mark, but the piercing should come out really quickly. Be careful, though, because the steam may burn your skin if you aren’t careful. You can also use boiling water if you want to add a new piercing to your nose. Just carefully pour the water over the new piercing and then use a clean pair of tweezers to gently place the new nose stud in the hole. It is an excellent way to avoid pain and discomfort when you are putting in a new piercing.
Final Words
If you’ve been struggling with how to take out a nose stud with a flat back, these tips should help you get the job done. Once you’ve got the stud out, you can breathe a sigh of relief knowing that you won’t have to deal with that piercing again! You can also get a brand new piercing with a fresh, new stud! Now that you’ve got the stud out, you can breathe a sigh of relief knowing that you won’t have to deal with that piercing again! You can also get a brand new piercing with a fresh, new stud! Ready to ditch your nose stud? Check out this guide to help you take out a nose stud with a flat back!
